Compatibility:
All TEOS and NEO enclosures
Description:
Hinged and lockable modular partial cover plates used to create a sectional internal front cover inside the enclosure.
Available in three versions: solid type, DIN device slotted type, and ventilated type.
Once the cover plates are fully installed, the system provides IP3XC protection according to IEC EN 60529.
Complies with IEC 62208 standards.
Related Dimensions:
Enclosure Width (W) and Cover Plate Height (H1)
Material:
DC01 sheet steel
Surface Finish:
Nano-coating pre-treatment with RAL 7035 powder coating
Supply Includes:
1 partial cover plate, hinges, and screw-nut locking system.
Required:
For installation inside the enclosure, 1 Cover Plate Frame Set matching the enclosure heigh and widtht is required.
When selecting partial cover plates, the net internal height of the frame must be taken into consideration.
| | | | Product Code | Width (W) | Type | Plate Height(H) |
|---|
| 2D DXF | 3D STEP | 954.415 | 400mm (15.7") | Solid | 150mm (5.91") |
| 2D DXF | 3D STEP | 954.430 | 400mm (15.7") | Solid | 300mm (11.81") |
| 2D DXF | 3D STEP | 954.440 | 400mm (15.7") | Solid | 400mm (15.7") |
| 2D DXF | 3D STEP | 954.460 | 400mm (15.7") | Solid | 600mm (23.6") |
| 2D DXF | 3D STEP | 954.615 | 600mm (23.6") | Solid | 150mm (5.91") |
| 2D DXF | 3D STEP | 954.630 | 600mm (23.6") | Solid | 300mm (11.81") |
| 2D DXF | 3D STEP | 954.640 | 600mm (23.6") | Solid | 400mm (15.7") |
| 2D DXF | 3D STEP | 954.660 | 600mm (23.6") | Solid | 600mm (23.6") |
| 2D DXF | 3D STEP | 954.815 | 800mm (31.5") | Solid | 150mm (5.91") |
| 2D DXF | 3D STEP | 954.830 | 800mm (31.5") | Solid | 300mm (11.81") |
| 2D DXF | 3D STEP | 954.840 | 800mm (31.5") | Solid | 400mm (15.7") |
| 2D DXF | 3D STEP | 954.860 | 800mm (31.5") | Solid | 600mm (23.6") |